Pimoroni NVMe Base Duo Review

[Pelican Press 0]

This is the hidden content, please

• Sign In
• or
• Sign Up

Pimoroni NVMe Base Duo Review

It seems that PCIe based add-ons for the Raspberry Pi 5 are en vogue as we seem to be reviewing a plethora of boards. So far we have reviewed the Pineboards Hat Drives, Pimoroni’s NVMe Base and most recently the official Raspberry Pi M.2 HAT+. All of these boards offer a single M.2 connection for PCIe devices or the best NVMe SSDs. 

Pimoroni’s $30

This is the hidden content, please

• Sign In
• or
• Sign Up

offers dual M.2 connections for PCIe / NVMe but there is one caveat, performance isn’t as fast as “solo” NVMe HAT boards. Pimoroni is upfront about this and in this review we’ll delve into the performance data and explain why.

So let’s get started!

Pimoroni NVMe Base Duo Specifications

Swipe to scroll horizontally

PCIe Interface	PCIe x1 supporting Gen 2 and Gen3
M.2 Support	2 x NVMe 2230, 2242, 226 and 2280
Power	Via FPC
Dimensions	85 x 56 mm
Price	£30 ($30)

NVMe Base Duo Design

Image 1 of 4

(Image credit: Tom’s Hardware)

(Image credit: Tom’s Hardware)

(Image credit: Tom’s Hardware)

(Image credit: Tom’s Hardware)

At a glance, the NVMe Base and the Duo are so much alike. The only real differences being the dual slots on the Duo, and the ASM1182e PCI Express packet switch, more on that later. Designed to fit on the underside of the Raspberry Pi 5, well away from the GPIO and your choice of cooling, the NVMe Base Duo matches the footprint of the Raspberry Pi. 

Held in place using four M2.5 standoffs and screws, the only connection between the two boards is the custom made PCIe Flat Flex Cable (FFC) which provides both data and power to the NVMe Base Duo. The FFC also blocks easy access to the micro SD card slot. You probably won’t need it, but when you do, it won’t be easy.

The NVMe Base Duo is slightly taller than the NVMe Base, only a few millimeters but it will matter for those of us who 3D print cases and chassis.

Image 1 of 4

(Image credit: Tom’s Hardware)

(Image credit: Tom’s Hardware)

(Image credit: Tom’s Hardware)

(Image credit: Tom’s Hardware)

Building the NVMe Base Duo is simple. A few screws and the FFC is all it takes. We used both a 2230 and 2280 NVMe SSD and the mounting ****** was easy to move around the board.

NVMe Base Duo Performance

We updated the firmware to the latest version, currently June 5 2024, but we also tested it on May 17. Firmware released after May 17 benefits NVMe Base Duo greatly, not for speed or throughput, rather the ability to boot. On earlier firmware versions, any NVMe drives behind a PCIe packet switch chip would not boot.

The Raspberry Pi 5 could only see drives directly on the PCIe connection, not hidden behind the packet switch. This meant that using an older firmware would force the user to boot from USB / Micro SD and use the NVMe drives for general storage. Not ideal but it worked. These newer firmwares now provide users with faster boot times and plentiful storage space.

Swipe to scroll horizontally

Header Cell – Column 0	Boot time in seconds	Header Cell – Column 2
NVMe Base Duo (Gen 2 Only)	20.38	Row 0 – Cell 2
Micro SD (SDR104 / A1)	21.28	Row 1 – Cell 2
NVMe Base (Gen 3)	16.79	Row 2 – Cell 2

Boot time is a respectable 20.38 seconds, comparable to the best Micro SD cards using A1 and SDR104 compatibility which come in at 21.28 seconds. For reference, Pimoroni’s NVME Base at Gen 3 speeds booted in 16.79 seconds. 

We tested two different operating systems, each on its own drive. In slot B we had a Phison based 2230 NVMe SSD with Raspberry Pi OS. In slot A we had the latest Ubuntu 24.04 release. Why did we mention slot B before A? Because the drive in slot B is always chosen as the boot. We swapped the drives (A: Raspberry Pi OS, B: Ubuntu) and re-tested. Ubuntu 24.04 booted from slot B. Logically we would expect A to be the first choice for a boot device, but this is something to be mindful of.

Swipe to scroll horizontally

Header Cell – Column 0	Throughput in MB/s	Header Cell – Column 2
NVMe Base Duo (Gen 2 One Drive)	449	Row 0 – Cell 2
NVMe Base Duo (Gen 2 One Drive)	891	Row 1 – Cell 2
NVMe Base Duo (Gen 2 Two Drives)	(A)228, (B)232	Row 2 – Cell 2
Moving 4GB file between A and B drive	209.99	Row 3 – Cell 2
NVMe Base (Gen 3)	876	Row 4 – Cell 2

(Image credit: Tom’s Hardware)

Performance on the NVMe Base Duo is as Pimoroni explains on its

This is the hidden content, please

• Sign In
• or
• Sign Up

. If you plan to run just a single drive, then by all means bump up the speed to PCIe Gen 3 and enjoy! If you want to do that, perhaps the NVMe Base is a cheaper and better option.

The NVMe Base Duo is best experienced at PCIe Gen 2 speeds, but why? This is down to the ASM1182e PCI Express packet switch. Essentially this gives us two PCIe x 1 Gen 2 ports. Yes this means that we take a performance hit. In our tests we confirmed Pimoroni’s claim of 450 MB/s total throughput. If using one drive then you get all the throughput, but add a second drive and you’ll split the throughput equally between them. 

We tinkered with this a little, hoping that PCIe Gen 3 could be coaxed out of the ASM1182e, but alas it wasn’t to be. PCIe Gen 2 speeds are still faster than Micro SD which manages an impressive, but slower 90.5 MB/s read and 30.8MB/s write speed.

(Image credit: Tom’s Hardware)

Perhaps though you don’t want to use the additional M.2 slot for an NVMe drive, maybe another PCIe device? We tested the Hailo-8L NPU that comes with the Raspberry Pi AI Kit. Placing the NPU in slot B and our OS drive in slot A we were able to run both devices at the same time. So we could have a fast NPU and fast storage bringing us improved AI performance.

Who is Pimoroni NVMe Base Duo for and what can they do with it?

(Image credit: Tom’s Hardware)

Small network storage devices for your media are the first thought that springs to mind. With 4TB NVMe drives becoming relatively plentiful we could build a small file server that sits on a shelf without much noise. We could also add a Raspberry Pi Camera Module 3 and create a streaming video server which stores video locally.

Bottom Line

(Image credit: Tom’s Hardware)

Pimoroni’s NVMe Base Duo is more expensive than the NVMe Base, but if you want an extra drive then the Duo is a great platform. There are alternatives, Pineboards has its own version that we have on the test bench, and Geekworm’s X1011 offers four drives. But Pimoroni’s $30 NVMe Base Duo is a solid piece of kit on which we can build a power Arm powered PC.

This is the hidden content, please

• Sign In
• or
• Sign Up

#Pimoroni #NVMe #Base #Duo #Review

This is the hidden content, please

• Sign In
• or
• Sign Up

This is the hidden content, please

• Sign In
• or
• Sign Up

For verified travel tips and real support, visit: https://hopzone.eu/